Highlight aftermarket iPhone 7 LCD Screen Test

-
Based on our customer feedback of the dim display issue, the factory made technology improvement and finally a new kind of iPhone LCD screen has came into the market. Compared with the ordinary China Made source, it has higher brightness and the polarizer issue is solved. Here we have made a comparison test video about luminance and polarizer among the High brightness, the ordinary and Original iPhone 7 screens.

评论

发表评论

此博客中的热门博文

Collection for the article "does iPhone X worth to buying"

-
http://bit.ly/2MzyuKN https://goo.gl/JvnquV http://sco.lt/5spaNN https://getpocket.com/redirect?url=https%3A%2F%2Fwww.etradesupply.com%2Fblog%2Fworth-buy-iphone-x-iphone-2018%2F&formCheck=d64e854b1bd3ed7ceece44c1df4faf2c http://www.pearltrees.com/phoneparts#item231562918 https://diigo.com/0cydbf https://www.bibsonomy.org/url/4c457738a0ce71fa3b91dde91493f37b https://disqus.com/home/channel/mobiletipstricks/discussion/channel-mobiletipstricks/does_the_iphone_x_worth_to_buy_now/ https://www.quora.com/unanswered/Does-the-iPhone-X-worth-to-buy-now https://phonerepair199.wordpress.com/2018/08/29/does-the-iphone-x-worth-to-buy-now/ https://arvindingcheng.tumblr.com/post/177503932858/is-it-worth-to-buy-iphone-x-or-the-new-iphone http://etsparts.blogspot.com/2018/08/does-iphone-x-worth-to-buy-now.html https://www.pinterest.jp/pin/619878336187218964/ http://www.folkd.com/ref.php?go=https%3A%2F%2Fwww.etradesupply.com%2Fblog%2Fworth-buy-iphone-x-iphone-2018 http://b
阅读全文

How to Replace the iPhone XR Charging Port

-
图片
Sometimes your iPhone XR’s would be damaged on the charging port after water damaged. You will need to replace it with a new one. Here we would like to show you how to replace an iPhone XR charging port in steps. Let’s check it our below: Step 1: Teardown the phone 1.1    Take out the SIM card tray and snap off the two screws on the bottom 1.2    Separate the screen with ultra-thin plastic cards and a suction cup 1.3    Twist off the two Philips screws eight Y-type screws 1.4    Take out the protection metal boards, disconnect the battery cable, the display          flex cable, touch flex cable, ear speaker flex cable Step 2: Remove the Loudspeaker and Taptic engine 2.1 Remove the black adhesive, twist off the 14 Philips screws and 5 cross screws 2.2 Take out the single cable, the SIM card holder 2.3 Snap off the two cross screws and take out the loudspeaker 2.4 Disconnect the Taptic engine and take it out Step 3: Remove the motherboard 3.1 Disconnect the
阅读全文

How to fix iPhone 7 front facing camera voice low after LCD screen replacement?

-
图片
Recently we got a customer feedback that the voice of iPhone7 front-facing camera microphone is small after replacing the  LCD screen . Our company attaches great importance to this issue and submitted it to our tech central. After careful depth learning and practice, our engineers found it was caused by the incorrect installation of the sensor cable. The wrong installation of sensor cable leads to the microphone can’t be installed to the correct position, which causes the microphone dysfunction. Following are how to fix this issue. Step 1 Remove the Plate and Ear Speaker Undo 5 screws shown as below with a screw driver then you can remove the plate and  ear speaker  easily. Step 2 Reinstall the Flex Cable Take out the  flex cable  with a tweezers then reinstall it. As the two pictures shown below, the first one is correct installation and the second one is incorrect. Step 3 Assemble the Ear Speaker and Plate Put back the ear speaker and plate then tighten the 5 screws
阅读全文