博文

目前显示的是标签为“repair”的博文

How to replace HTC One broken screen?

If you have the cracked screen on HTC One and you don’t want to send it back to Samsung’s flagship store, you can try to DIY fix it yourself if you can deal with the challenge.Here we made a step by step tutorial will teach you how to replace the damaged HTC One’s front housing, charging port PCB board, front or rear facing camera, battery and etc. Read more here:https://www.etradesupply.com/blog/how-to-repair-cracked-htc-one-screen/

LG G6 tear down within 5 minutes

Finally LG G6 has come to our vision, with its 5.7 inch FullVision screen, snapdragon 821 chipset, this LG flagship must amaze us all again, can’t wait to see how it changes in its own inside! Here we’ve gathered some official teardown work of LG G6 to share with you all. So without further ado, let’s get started! Know more about it here:https://www.etradesupply.com/blog/get-through-lg-g6-teardown-process-within-5-minites/

How to replace Samsung Galaxy S4 Mini broken screen?

Although it’s a little more complicated to tear down the Samsung Galaxy S4 Mini than the Galaxy S4, it’s still not much difficult to repair a cracked S4 Mini screen. Follow the steps below and you’ll know how to give your S4 Mini a new look.

Sony Xperia XZ Premium Teardown/Disassembly

图片
Released on June 2017, this Xperia XZ Premium is the newest flagship smartphone of Sony. It comes to us with a 4K 5.50-inch touchscreen display, IP68 certified, Snapdragon 835 chipset, 19M rear camera. Here we’d like to show you the whole teardown process of this Sony Xperia XZ Premium, showing the ropes on how to replace its screen assembly, battery, charging port replacements etc. Tools needed: Heat gun Philips screwdriver Tweezers Spudger Plastic thin card Step 1 Power off the Phone and take out the SIM Card Tray It is necessary to power off the phone then take out the SIM card tray before starting this disassemble work. Step 2 Remove Back Housing Heating the back housing with a heat gun will make it easier to remove the back housing. Pry the gap between back housing and frame with a plastic thin card then slide around the phone edge. (Heat it again if it’s hard to remove) Step 3 Remove Motherboard Undo 9 screws as shown in the picture below with Phi...