Can I replace the Face ID hardware to repair it?

-
We all know that iPhone 7 Touch ID will not work after replacing it, here we will test whether the iPhone X Face ID still works after replacing the hardware.
Read more here.

评论

发表评论

此博客中的热门博文

Replacement LCD display and digitizer assembly for iPhone 6 black

-
图片
OEM Apple iPhone 6 LCD Screen and Digitizer Assembly with Frame – White Use the coupon code ETSGFR5Z for extra discount when shopping at www.etradesupply.com ! (The coupon can only be applied for orders 50+ before shipping)   You could buy this part at http://www.etradesupply.com/apple-iphone-6-lcd-screen-and-digitizer-assembly-with-frame.html This Apple iPhone 6 LCD Assembly replacement contains: ● LCD Display ● Digitizer Touch Screen ● Front Frame ● Ear Speaker Mesh Cover Notes: Please test the functionality of this item before installation. Specifications: Color: White Screen Size: 4.7 inches Resolution: 750 x 1334 pixels, 326 ppi pixel density Display Type: LED-backlit IPS LCD, capacitive touchscreen, 16M Protective Material: Shatter proof glass, oleophobic coating Compatibility: Apple iPhone 6 Features: ● This iPhone 6 Screen Replacement includes the LCD Screen with Frame, Ear Speaker Mesh Cover, Digitizer Touch Screen with Glass Lens already attached. ●...
阅读全文

How to Replace the iPhone XR Charging Port

-
图片
Sometimes your iPhone XR’s would be damaged on the charging port after water damaged. You will need to replace it with a new one. Here we would like to show you how to replace an iPhone XR charging port in steps. Let’s check it our below: Step 1: Teardown the phone 1.1    Take out the SIM card tray and snap off the two screws on the bottom 1.2    Separate the screen with ultra-thin plastic cards and a suction cup 1.3    Twist off the two Philips screws eight Y-type screws 1.4    Take out the protection metal boards, disconnect the battery cable, the display          flex cable, touch flex cable, ear speaker flex cable Step 2: Remove the Loudspeaker and Taptic engine 2.1 Remove the black adhesive, twist off the 14 Philips screws and 5 cross screws 2.2 Take out the single cable, the SIM card holder 2.3 Snap off the two cross screws and take out the loudspeaker 2.4 Disconnect the Taptic engine and tak...
阅读全文

Sony Xperia XZ Premium Teardown/Disassembly

-
图片
Released on June 2017, this Xperia XZ Premium is the newest flagship smartphone of Sony. It comes to us with a 4K 5.50-inch touchscreen display, IP68 certified, Snapdragon 835 chipset, 19M rear camera. Here we’d like to show you the whole teardown process of this Sony Xperia XZ Premium, showing the ropes on how to replace its screen assembly, battery, charging port replacements etc. Tools needed: Heat gun Philips screwdriver Tweezers Spudger Plastic thin card Step 1 Power off the Phone and take out the SIM Card Tray It is necessary to power off the phone then take out the SIM card tray before starting this disassemble work. Step 2 Remove Back Housing Heating the back housing with a heat gun will make it easier to remove the back housing. Pry the gap between back housing and frame with a plastic thin card then slide around the phone edge. (Heat it again if it’s hard to remove) Step 3 Remove Motherboard Undo 9 screws as shown in the picture below with Phi...
阅读全文