Nokia Lumia 900 LCD Screen and Digitizer Assembly|LCD Assembly|Digitizer Assembly

-
Nokia Lumia 900 LCD Screen and Digitizer Assembly|LCD Assembly|Digitizer Assembly

评论

发表评论

此博客中的热门博文

Sony Xperia XZ Premium Teardown/Disassembly

-
图片
Released on June 2017, this Xperia XZ Premium is the newest flagship smartphone of Sony. It comes to us with a 4K 5.50-inch touchscreen display, IP68 certified, Snapdragon 835 chipset, 19M rear camera. Here we’d like to show you the whole teardown process of this Sony Xperia XZ Premium, showing the ropes on how to replace its screen assembly, battery, charging port replacements etc. Tools needed: Heat gun Philips screwdriver Tweezers Spudger Plastic thin card Step 1 Power off the Phone and take out the SIM Card Tray It is necessary to power off the phone then take out the SIM card tray before starting this disassemble work. Step 2 Remove Back Housing Heating the back housing with a heat gun will make it easier to remove the back housing. Pry the gap between back housing and frame with a plastic thin card then slide around the phone edge. (Heat it again if it’s hard to remove) Step 3 Remove Motherboard Undo 9 screws as shown in the picture below with Phi...
阅读全文

Car Charger for Apple iPhone 5

-
图片
Apple iPhone 5 Car Charger ATTENTION! Everyone can use this coupon code: ETSTK07 for extra discounts on www.etradesupply.com on order over $5 . You can also find coupon codes everyday at https://twitter.com/ETradeSupply http://www.facebook.com/ETradeSupply You can buy this product here at http://www.etradesupply.com/apple-iphone-5-car-charger.html Product Features & ETS Advantages Product Features: 1. The Car Charger is a must have on the go for iPhone 5 owners, which is convenient for you to charge your phone at any time in your vehicle when you are driving. 2. This iPhone 5 car charger is designed with easy plug-and-play installation, which is also portable. It also includes the 8-pin lightning charging cable, which is compatible with Apple’s new products in 2012, such as iPad mini , iPad 4. 3. Please do not hesitate and upgrade your in-car integration accessories. Wholesale will be greatly welcome and appreciated. ETS Advantages: 1. ETra...
阅读全文

How to Replace the iPhone XR Charging Port

-
图片
Sometimes your iPhone XR’s would be damaged on the charging port after water damaged. You will need to replace it with a new one. Here we would like to show you how to replace an iPhone XR charging port in steps. Let’s check it our below: Step 1: Teardown the phone 1.1    Take out the SIM card tray and snap off the two screws on the bottom 1.2    Separate the screen with ultra-thin plastic cards and a suction cup 1.3    Twist off the two Philips screws eight Y-type screws 1.4    Take out the protection metal boards, disconnect the battery cable, the display          flex cable, touch flex cable, ear speaker flex cable Step 2: Remove the Loudspeaker and Taptic engine 2.1 Remove the black adhesive, twist off the 14 Philips screws and 5 cross screws 2.2 Take out the single cable, the SIM card holder 2.3 Snap off the two cross screws and take out the loudspeaker 2.4 Disconnect the Taptic engine and tak...
阅读全文